Nashua, New Hampshire Roofing Local Permit Ordinances and Codes
In Nashua, New Hampshire, the Building Safety Department is the Authority Having Jurisdiction for municipal permit ordinances related to roofing.
Permit Requirements and Fees
- Building permits are generally required for roof replacements and major repairs.
- However, re-roofing one- and two-family residences with asphalt shingles does not require a permit if the work adheres to building code standards.
- For projects requiring a permit, fees can range from $75 to $300, depending on the project's value.
- Alternatively, permit fees can be calculated based on the square footage of the affected area:
- Residential (one- and two-family, townhouses): $0.18 per square foot.
- Commercial (including multifamily): $0.28 per square foot.
- There is a minimum permit fee of $50, plus a $35 filing fee per permit, and an additional $25 Land Use review fee.
- For commercial roofing other than asphalt shingles, the fee is based on construction or installation cost at $0.65 per $100.
- Emergency repairs may qualify for same-day permit approval.
Zoning Nuances
- While specific zoning ordinances directly impacting roofing permits are not detailed in the search results, general zoning regulations apply to all construction. No building permit will be issued unless the proposed structure conforms to the dimensional regulations of the zoning district in which it is located.
- Overhanging roofs, eaves, gutters, and cornices are permitted but generally cannot exceed two feet.
- Site plan changes and changes of use require Planning and Zoning approval.
Resources to Learn More
Because Nashua is located within Hillsborough County, the following broader county regulations may also apply to your project:
New Hampshire, Hillsborough County Roofing Permit Regulations and County Ordinances for Unincorporated Areas
Roofing Permit Requirements in Hillsborough County, New Hampshire
In New Hampshire, there is no county-level building department that oversees roofing permits. Building permit authority is managed exclusively at the local municipal level (by individual cities and towns). Hillsborough County, as a county government entity, does not issue building or roofing permits for properties within its borders.
Because permitting is handled by local municipalities, requirements for roofing projects vary significantly from one town to another. Some municipalities may require a permit for re-roofing or re-shingling, while others may consider such work to be maintenance and exempt it from permitting requirements. You must contact the building department or code enforcement officer of the specific town or city where the property is located to determine if a permit is necessary for your project.
Rules for Properties in Unincorporated Areas
New Hampshire does not have "unincorporated areas" in the same sense as many other states where county government provides direct services like building code enforcement. Every parcel of land in New Hampshire falls within the jurisdiction of a specific town or city. Even in rural or sparsely populated areas, the local town government is responsible for adopting and enforcing building codes and issuing permits. If you are planning a roofing project, you must contact the local town office or building official for the municipality in which the property is situated to confirm the applicable regulations.
Resources to Learn More
The following statewide building codes and regulations apply universally to all jurisdictions within New Hampshire:
New Hampshire Roofing Legislation, Codes, and Guidelines
New Hampshire State Building Code and Roofing Legislation
The State of New Hampshire mandates compliance with the New Hampshire State Building Code for the construction, alteration, and repair of buildings. As of the most recent updates, the state has adopted the 2021 editions of the International Code Council (ICC) model codes as the base standards. Specifically, residential roofing projects are governed by the 2021 International Residential Code (IRC), while commercial roofing projects fall under the 2021 International Building Code (IBC). These model codes are adopted by reference under New Hampshire Revised Statutes Annotated (RSA) Chapter 155-A, and they include specific New Hampshire amendments that must be followed.
The primary agency responsible for these standards is the New Hampshire State Building Code Review Board (BCRB). The BCRB is tasked with reviewing model codes, recommending legislation to adopt or amend them, and ensuring consistency in the application of building regulations across the state. While the state sets these minimum standards, enforcement is typically handled at the local municipal level by building officials. In municipalities that do not have a local building official or enforcement mechanism, the State Fire Marshal's Office holds authority for enforcement.
Resources to Learn More